Search Results
-
Theatre Practicum IV - TH134
Course Description: A continuation of TH133, participation in main stage theatre productions with crew lead responsibilities.
Course Notes: TH133 Theatre Practicum III.
Spring
-
Sections:
TH134 001252S Main Campus
Section Type: Lecture
Credit Hours: 1.00
Section Notes: Minimum of 45 clock hours required. Recommended for all theatre majors. Students on academic probation may not participate in productions.
-
-
Theatre Capstone - TH250
Course Description: Conceptual and technical culmination of the Associate of Fine Arts. Integration of previous theatre course material through creation of project and portfolio.
Spring
-
Sections:
TH250 001252S Main Campus
-
-
Technical Math - TR100
Course Description: Review of math principles, through fraction and decimal measurements and equivalents, ratios, powers and roots, and basic geometry for industrial technology program majors.
Spring
-
Work Ethics - TR120
Course Description: Skills required for success in the workplace with focus on the development of positive work habits and communication skills.
Spring
-
Sections:
TR120 001252S Main Campus - TR120 004252S Newton Canceled
- TR120 006252S Newton
-
TR120 003252S
South Campus
Limited
Section Type: Lecture
Credit Hours: 2.00
Section Notes: Ag Diesel Mechanics / John Deere Service Technician students only.
- TR120 002252S Hutchinson
-
-
Basic Welding - WE100
Course Description: Introduction to equipment, procedures and safety practices used in cutting steel with oxy-fuel equipment, as well as shielded metal arc welding, gas-tungsten arc welding and gas metal arc welding.
Spring
-
Sections:
WE100 001252S Main Campus
Section Type: Lecture
Credit Hours: 3.00
Section Notes: This class requires the student to purchase/provide, leather safety toed boots, welding gloves, safety glasses & welding beanie. Basic tools, PPE & equipment needed for welding is supplied by program.
-
-
Welding Blueprint Reading - WE102
Course Description: Identification of the alphabet of lines, common views, industry related materials, abbreviations, American Welding Society (AWS) welding symbols and International Organization Standardization (ISO) welding symbols; interpretation of title block, bill of materials, revision history and isometric shapes to sketch blueprints using orthographic projection practices; application of mathematical equations and basic measuring tools used in welding blueprints.
Spring
-
Shielded Metal Arc Welding II - WE105
Course Description: Continuation of WE104 Shielded Metal Arc Welding; reviewing safety, electrode identification, workstation setup and use of Shielded Metal Arc Welding (SMAW) equipment to perform welds on plate using E6010 (fast freeze, cellulosic) and E7018 (low hydrogen) electrodes in the vertical (3F & 3G) and overhead (4F & 4G) positions to meet requirements of the latest version of the American Welding Society D1.1/D1.1M:20XX Structural Welding Code-Steel.
Course Notes: WE104 SMAW w/Grade of C or Higher, or Departmental Consent.
Spring
-
Gas Metal Arc Welding - WE110
Course Description: Through classroom and/or shop/lab learning and assessment activities, students in this course will: explain gas metal arc welding process (GMAW); demonstrate the safe and correct set up of the GMAW workstation.; correlate GMAW electrode classifications with base metals and joint criteria; demonstrate proper electrode selection and use based on metal types and thicknesses; build pads of weld beads with selected electrodes in the flat position; build pads of weld beads with selected electrodes in the horizontal position; produce basic GMAW welds on selected weld joints; and conduct visual inspection of GMAW welds.
Spring
-
Sections:
WE110 004252S McPherson Limited -
WE110 002252S
Newton
Section Type: Lecture
Credit Hours: 3.00
Section Notes: Meets daily through 1/23/26 then meets on M,W,F only until 4/2/26.
-
WE110 003252S
Newton
Limited
Section Type: Lecture
Credit Hours: 3.00
Section Notes: Meets daily through 1/23/26 then meets on M,W,F only until 4/2/26.
- WE110 001252S Hillsboro Full
-
-
Gas Metal Arc Welding II - WE111
Course Description: Continuation of WE110 Gas Metal Arc Welding; reviewing of safety, workstation set up; electrode classifications; proper electrode selection and use based on metal types and thicknesses; and the use of .035 and .045 electrode diameters in the short circuit and pulse spray transfer methods; performing welds in the vertical (3F & 3G) and overhead (4F & 4G) test positions to meet requirements of the latest version of the American Welding Society D1.1/D1.1M:20XX Structural Welding Code-Steel.
Course Notes: WE110 Gas Metal Arc Welding w/Grade of C or Higher.
Spring
-
Gas Tungsten Arc Welding - WE112
Course Description: Through classroom and/or lab/shop learning and assessment activities, students in this course will: explain the gas tungsten arc welding process (GTAW); demonstrate the safe and correct set up of the GTAW workstation; relate GTAW electrode and filler metal classifications with base metals and joint criteria; build proper electrode and filler metal selection and use based on metal types and thicknesses; build pads of weld beads with selected electrodes and filler material in the flat position; build pads of weld beads with selected electrodes and filler material in the horizontal position; perform basic GTAW welds on selected weld joints; and perform visual inspection of GTAW welds.
Spring
-
Sections:
WE112 004252S McPherson Limited
Section Type: Lecture
Credit Hours: 3.00
Section Notes: McPherson High School students only. No books required.
Meeting Times:
-
Days: MTRF
Times: 12:28 PM - 3:10 PM
Campus: McPherson
Building: McPherson High School
Room: MHS01
-
Days: W
Times: 11:57 AM - 2:35 PM
- WE112 001252S Newton Limited
- WE112 003252S Newton Limited
- WE112 002252S Hillsboro Full
-
-
Gas Tungsten Arc Welding II - WE113
Course Description: Advanced Gas Tungsten Arc Welding processes including welding of carbon steel, stainless steel, aluminum, and tubing materials.
Course Notes: WE112 GTAW w/Grade of C or Higher.
Spring
-
Welding Layout and Calculations - WE115
Course Description: Project layout, the economics of welding design, fabrication and blueprint reading; application of geometric principles and linear measurements applied to fabrication and welding through the practical application of principles.
Spring
-
Flux Cored Arc Welding - WE116
Course Description: Through classroom and lab/shop activities; FCAW safety, electrode classifications; proper electrode selection and use based on metal types, thicknesses, weld positions, and multi-pass vs single pass weld requirements; safe set up of FCAW workstation, welding with self-shielded and gas-shielded .045 or larger electrode diameters; in the horizontal (2F & 2G) vertical (3F & 3G) and overhead (4F & 4G) positions to meet requirements of the latest version of the American Welding Society D1.1/D1.1M:20XX Structural Welding Code-Steel.
Course Notes: WE110 Gas Metal Arc Welding w/Grade of C or Higher, or Departmental Consent, and WE111 Gas Metal Arc Welding II w/Grade of C or Higher.
Spring
-
Welding Inspection and Qualification I - WE117
Course Description: Overview of welding qualification, inspection processes, welder testing, related terminology, metals and consumables identification, application of welding processes in relation to the welding codes used in structural, pipeline, aerospace, manufacturing and energy sectors.
Spring
-
Industrial Robotic Welding - WE118
Course Description: Through classroom and lab/shop activities; programming an industrial style welding robot using the Gas Metal Arc Welding process on selected weld joints and shapes within the robot work cell; operation and use of robot through use of teach pendant and automatic operation, safe jogging and movement of robot, correct set up of robotic welding workstation; application of robotic motion types, robotic program development, saving and backing up robot and controller files.
Course Notes: WE110 Gas Metal Arc Welding, or Departmental Consent.
Spring
-
Sections:
WE118 001252S Newton - WE118 004252S Newton
-
-
Welding Metallurgy - WE128
Course Description: The study of ferrous and nonferrous metals, their production, mechanical properties, weldability, and machinability.
Spring
-
Gas Tungsten Arc Welding III - WE217
Course Description: Advanced training in GTAW processes through classroom and lab/shop activities; reviewing of arc welding safety; welding the root pass, hot pass, fill and cap passes with carbon steel filler materials on 6 inch schedule 40 steel pipe in the 2G and 5G positions to meet or exceed requirements of the latest American Society of Mechanical Engineers (ASME) Section IX Code Requirements.
Course Notes: WE112 GTAW w/Grade of C or Higher, or Departmental Consent, and WE113 GTAW II w/Grade of C or Higher.
Spring
-
Sections:
WE217 001252S Main Campus
-
-
Welding Inspection and Qualification II - WE220
Course Description: Advanced training in; welding qualification, visual inspection processes, welder testing, related terminology, metal and consumable identification, welding processes in relation to the welding codes used in the structural, pipeline, aerospace, manufacturing and energy sectors through the practical application and successful completion of welder qualification tests.
Course Notes: WE217 Gas Tungsten Arc Welding III, and WE218 Shielded Metal Arc Welding III.
Spring
-
Sections:
WE220 001252S Main Campus
-
